You are not logged in. Please login or register.
Robots for Robots → General Hardware / Software Discussion → New COCKpits & GearPics
"Splat" now that must be a good setting for that thing hehe
is it some sort of distressor or so?
Ohshit, this was supposed to be in the new booty thread.. Movealong.
Septic: http://www.kushaudio.com/kush/
Behold:
Doomsday Accelerator Device aka Spaghetti Monster
Testing out the new ultra wide angle lens:
Testing out the new ultra wide angle lens.
Nice! Good use for the Ai covers.
Thx
Behold:
Doomsday Accelerator Device aka Spaghetti Monster
LekkeR!
Just sorted the left side of the spare room and started squeezing out some beats and... it looks like we are moving again! So take the whole thing down and do it all again. yey!
Still need to decorate a bit after rebuilding the floor (had to rip out carpet and 3 feet of drywall after a basement flood), but once the synths were up decorating just kind of fell by the wayside. Priorities. 
Thanks Tony. Between the RME and Biamp are a Chandler Germanium, an API A2D, and an older MOTU Midi Express XT. Robot on the left is a "Music Robot" - weird early 80's Japanese walking/music playing robot - and the robot on the right is a dog toy from Old Navy.
very nice! heavy setup there to the right. do you do your mixing on the mac?
Yep I mix everything on the Mac using Live/APC40. No room for a proper mixer.
The Eternal Studio rebuild.. part 5.1 (still a bit to go)_
Nice setups!
they are, but i still see too much money spent on synths, fx, sound cards, etc, and not enough on a decent mixer! 
Hehe I was waiting for that Rude! 
Build me a bigger room/house and I promise I'll buy a proper mixer.
they are, but i still see too much money spent on synths, fx, sound cards, etc, and not enough on a decent mixer!
well, I also see a lot of people buying analog synths and drums but only a few have proper effects.. Imo most analog stuff is pretty boring without..
Yes, a worthwhile mixer is out of reach for me, so I decided to spend on some nice pres and fx instead. I don't feel like a mixer would improve much for me personally. I can't see sound quality or workflow improving drastically over my current setup...though "mixing" with the APC40 isn't the most inspiring thing in the world. I see a nicer control surface in my future.
Computerdisco - what's in the rack underneath the Kenton?
Yes, a worthwhile mixer is out of reach for me, so I decided to spend on some nice pres and fx instead. I don't feel like a mixer would improve much for me personally. I can't see sound quality or workflow improving drastically over my current setup...though "mixing" with the APC40 isn't the most inspiring thing in the world. I see a nicer control surface in my future.
yeah you have some nice fx! Whats that thing at the bottom, something from AKG/Tapco?
Whats that thing at the bottom, something from AKG/Tapco?
Yep, Tapco 4400 spring reverb.
Freek wrote:Whats that thing at the bottom, something from AKG/Tapco?
Yep, Tapco 4400 spring reverb.
ah ok, I have one too but with blue interface.. I use and like it a lot
Computerdisco - what's in the rack underneath the Kenton?
Its a very boring but very useful 8 in 8 out midi USB patchbay..
It was cheaper by £80 than the MOTU one.. seems very good. timing ect is fine (as well as can be expected for a computer sequenced setup anyway).
Robots for Robots → General Hardware / Software Discussion → New COCKpits & GearPics
Powered by PunBB, supported by Informer Technologies, Inc.
Currently used extensions: pun_approval, pun_admin_add_user. Copyright © 2009 PunBB
