Topic: Midi to Cv for Sh-09
I need it cheap, could you recommend me some site where i can buy it? Thanks..
You are not logged in. Please login or register.
Robots for Robots → General Hardware / Software Discussion → Midi to Cv for Sh-09
I need it cheap, could you recommend me some site where i can buy it? Thanks..
i'm using Little MCV from Philip Rees works fine.
no need of soldering
Get an external box, the Little MCV is good I had that one, the Din-sync.com devices are ok and cheap, but service is so-so. Doepfer make some single channel ones that are ok too, look on eBay, prices are usually around 100-120$.
Don't get the synhouse thing, it's more costly and there's really no need to hack a vintage synth for this.
Little MCV sucks, I have it. If you play fast notes it kind of lags, or that's how I remember it ... It's not very tight so to speak. Avoid!
Dtronics are good, you can even get a usb to cv one.
just be aware that the sh-09 needs 10V to be triggered, and a lot of standard midi-cv converters only do 5V.. so make sure it does 10 before you buy it..
Ok, so i will probably go for Din-Sync Mdcv1 as Dtronics signal is too weak to trigger sh-09. Thanks
Robots for Robots → General Hardware / Software Discussion → Midi to Cv for Sh-09
Powered by PunBB, supported by Informer Technologies, Inc.
Currently used extensions: pun_approval, pun_admin_add_user. Copyright © 2009 PunBB