26 Reply by RETALI8 (edited by RETALI8 2008-07-24 05:43:24)

  • RETALI8
  • Robot Without a Cause
  • Offline
  • From: Sydney
  • Registered: 2008-07-08
  • Posts: 352

Re: New COCKpits & GearPics

Wow those stolmen racks look great...I googled stolmen and it came up with ikea is that right?

Here are some crappy pics my friend took of of my setup, it's only half set up at the moment, it looks neatly organised thanks to the rack and stand but that's a bit misleading.
My room is a bit too small, my monitors only fit somewhere to the left of here, and my mpc doesnt fit so lately i mostly just jam on the 808+101 for hours on end instead of doing anything productive. Also got a (currently busted) juno 106 and a dr202 lying around somewhere. Need to invest a bit more cash into finishing it off I think, and ideally move it to a dedicated room but I don't think that will happen anytime soon due to too many bills goddamn

http://www.retali8one.com/studio-stand.JPG
http://www.retali8one.com/studio-rack.JPG

I was so close // I crept like a cat // visions of seduction lurkin under my hat
Zerohour Doom & Glamour | RETALI8 |  Cold Crush

Jackie Ransom, Luster & Beta Evers - Secrets Of The World out now on 7"/Digital

RETALI8's Website

  • From: Frank fruits
  • Registered: 2008-07-08
  • Posts: 351

Re: New COCKpits & GearPics

here is my somewhat smaller Stolmen corner. Note however, how well 19" units fit between the narrower shelf.
http://www.chewcabbage.de/images/studio_08.jpg

teknob's Website

28 Reply by INTERFUNK (edited by INTERFUNK 2008-07-24 09:25:54)

  • From: PLANET AU-DA
  • Registered: 2008-07-08
  • Posts: 368

Re: New COCKpits & GearPics

yeah these stolmens are not that bad .... don

Orgel!
  • From: CPH S
  • Registered: 2008-07-14
  • Posts: 635

Re: New COCKpits & GearPics

mono-poly wrote:

Midi / DynSync or an analogue clock.
As long it accepts MTC as master signal.

I think the Roland SPX 10 would do the trick, or maybe one of these http://www.engineersatwork.nl/catalog/i … p/cPath/58

Home is where your hardware is!!!
ErrorAudio SoundCloud
  • From: the stentecnology hideout
  • Registered: 2008-07-07
  • Posts: 2,305

Re: New COCKpits & GearPics

@ Interfunk:

those shoeshelves are pretty solid.
they hold all that stuff as you see in my studio and like dx7 is pretty heavy (32kg) compared to the Jupiter 8 (25kg).

https://soundcloud.com/stentec

S.T.E.N.T.E.C.'s Website

31 Reply by zthee (edited by zthee 2008-07-24 22:30:12)

  • zthee
  • mustache robot
  • Offline
  • From: STHLM
  • Registered: 2008-07-07
  • Posts: 38

Re: New COCKpits & GearPics

http://zthee.vantage.ch/modularen_1.jpg

http://zthee.vantage.ch/modularen_2.jpg

http://zthee.vantage.ch/modularen_3.jpg

http://zthee.vantage.ch/modularen_4.jpg

http://zthee.vantage.ch/modularen_5.jpg

I just finished my modular big_smile

It's the following modules:

TH XRVCO x 2
TH VCO-1 x 2
MFOS Dual VCA
MFSO ADSR
CGS Wavemultiplier
CGS Digital noise
CGS Analogue shift register
CGS VCA
CGS Suboscillator
CGS Wavetable
CGS Gate to trigger
CGS Synthacon
Fonitroik PS3100 Resonator
Fonitronik Dual Buchla Lowpass Gate
Fonitronik Dual Buchlaesque CV processor
Topp 281 Function generator
EFM LFO
EFM ADSR + VCA
EFM Transistor Ladder filter
MSC175 Dual VCS

  • Registered: 2008-07-07
  • Posts: 1,007

Re: New COCKpits & GearPics

congrats on your minitonto looks cool as hell

Showing the way for the modern man to become a Model Man.
  • From: near rotterdam
  • Registered: 2008-07-07
  • Posts: 1,656

Re: New COCKpits & GearPics

Erroraudio wrote:
mono-poly wrote:

Midi / DynSync or an analogue clock.
As long it accepts MTC as master signal.

I think the Roland SPX 10 would do the trick, or maybe one of these http://www.engineersatwork.nl/catalog/i … p/cPath/58

Unfortunely none off these accept MTC as main signal.

i don't need the gear, the gear needs me 
http://www.mono-poly.nl/

mono-poly's Website

34 Reply by Mantonio (edited by Rproductions 2008-07-25 00:10:52)

  • From: Amsterdam
  • Registered: 2008-07-09
  • Posts: 146

Re: New COCKpits & GearPics

cloud9 wrote:

all of you are bastards and i'm too embarassed to show any picture of my "cockpit" now. sad

Why? cockpit doesn't make tracks on its own...plus the more the gear,the more the time wasted on setting up,signal flow,missing midi and shit.....I hate when creativity gets stuck into tech problems (whatever digital or analog nature).


@ Error : really nice studio,where is it located?
Please take the tc m5000 out of the rack and trash it big_smile (or swap it with the 6000)

@ Retali8 :
Why don't you swap the alpha juno with the mpc then? I mean...do you really use that on top of the juppiter 6 ?!?!
Nice collection anyway!

Do you guys know a quick easy way to post pics here?

www.soundcloud.com/erre-1
www.soundcloud.com/erre-2
  • From: CPH S
  • Registered: 2008-07-14
  • Posts: 635

Re: New COCKpits & GearPics

Rproductions wrote:
cloud9 wrote:

all of you are bastards and i'm too embarassed to show any picture of my "cockpit" now. :(

Why? cockpit doesn't make tracks on its own...plus the more the gear,the more the time wasted on setting up,signal flow,missing midi and shit.....I hate when creativity gets stuck into tech problems (whatever digital or analog nature).


@ Error : really nice studio,where is it located?
Please take the tc m5000 out of the rack and trash it :D (or swap it with the 6000)

@ Retali8 :
Why don't you swap the alpha juno with the mpc then? I mean...do you really use that on top of the juppiter 6 ?!?!
Nice collection anyway!

Do you guys know a quick easy way to post pics here?

Thanx. The studio is in Copenhagen, we don't have a website at the moment because we have just shifted owner and name, or long story short, the original owner is back.

Ya... The m5000 might have to go soon, but not for a 6000. Id rather get a Lex960. Generally I don't fancy the new TC stuff, I think the verbs stick to a mix like ham on a wall, and with TC you can never just punch up a preset and go Hmmm that sounds great. There is always something that needs tweaking, and i hate their menus. Ohh it's late and I'm ranting. I guess it all comes down to taste, and sure the 6000 platform can do some great things, but I have personally never been really impressed by it, and neither has the studio owner.  The good guys at TC have demoed it for us 3 times now.

Home is where your hardware is!!!
ErrorAudio SoundCloud

36 Reply by Mantonio (edited by Rproductions 2008-07-25 01:43:05)

  • From: Amsterdam
  • Registered: 2008-07-09
  • Posts: 146

Re: New COCKpits & GearPics

yeah I totally agree on what you said about tc preset and stuff...I really need to tweak em to get a decent sound on the tc5000 that imho is too metallic anyway...on top of that we have a little lexicon pcm70...it blows the tc away...

I said 6000 cuz I see you have 2 lex already but I can understand the more lexi the better big_smile

I gotta say that the tc mone really impressed me instead,cheap ok but fucking good sounding! I got one right away after I tried the xl in the studio...

Now that you tell me bout Copenhagen I remember from the old cbs post wink

(tried to post the pic with zshare but doesn't work sad )

www.soundcloud.com/erre-1
www.soundcloud.com/erre-2
  • From: CPH S
  • Registered: 2008-07-14
  • Posts: 635

Re: New COCKpits & GearPics

Go http://imageshack.us/ .... It works

Home is where your hardware is!!!
ErrorAudio SoundCloud
  • From: chroot
  • Registered: 2008-07-07
  • Posts: 680

Re: New COCKpits & GearPics

@Zthee:

real nice modular over there! any info about the panel markings? how did you do that/

  • From: beyond
  • Registered: 2008-07-08
  • Posts: 156

Re: New COCKpits & GearPics

kool picture! thats quite a noodle you got there on the floor!

mono-poly wrote:

Ok kinda a repost.

http://img146.imageshack.us/img146/2559/sta73601fx5.jpg

touch your fear, dont be afraid!
  • r2dj
  • Robot
  • Offline
  • Registered: 2008-07-09
  • Posts: 317

Re: New COCKpits & GearPics

Erroraudio wrote:

Generally I don't fancy the new TC stuff, I think the verbs stick to a mix like ham on a wall

wow - i don't know what this means, but I like your turn of phrase!

  • From: near rotterdam
  • Registered: 2008-07-07
  • Posts: 1,656

Re: New COCKpits & GearPics

ouroboros wrote:

kool picture! thats quite a noodle you got there on the floor!

mono-poly wrote:

Ok kinda a repost.

http://img146.imageshack.us/img146/2559/sta73601fx5.jpg

big_smile

i don't need the gear, the gear needs me 
http://www.mono-poly.nl/

mono-poly's Website

  • From: CPH S
  • Registered: 2008-07-14
  • Posts: 635

Re: New COCKpits & GearPics

mono-poly wrote:
Erroraudio wrote:
mono-poly wrote:

Midi / DynSync or an analogue clock.
As long it accepts MTC as master signal.

I think the Roland SPX 10 would do the trick, or maybe one of these http://www.engineersatwork.nl/catalog/i … p/cPath/58

Unfortunely none off these accept MTC as main signal.

I think the roland does, but I will have to check.....

I'm on vacation.

Home is where your hardware is!!!
ErrorAudio SoundCloud
  • rude66
  • robot des duivels
  • Offline
  • Registered: 2008-07-07
  • Posts: 1,844

Re: New COCKpits & GearPics

alex_d_steak wrote:

@Zthee:

real nice modular over there! any info about the panel markings? how did you do that/

i was wondering the same thing.. looks very nice!

  • From: Amsterdam
  • Registered: 2008-07-09
  • Posts: 146

Re: New COCKpits & GearPics

Ok here's a little collage of my current setup!

http://img148.imageshack.us/img148/8247/studiocollagejuly2008is7.jpg

www.soundcloud.com/erre-1
www.soundcloud.com/erre-2

45 Reply by INTERFUNK (edited by INTERFUNK 2008-07-26 17:42:52)

  • From: PLANET AU-DA
  • Registered: 2008-07-08
  • Posts: 368

Re: New COCKpits & GearPics

what

Orgel!
  • From: chroot
  • Registered: 2008-07-07
  • Posts: 680

Re: New COCKpits & GearPics

@Rproductions:

How is the Red Square doing? Always wondered about that synth...

  • zthee
  • mustache robot
  • Offline
  • From: STHLM
  • Registered: 2008-07-07
  • Posts: 38

Re: New COCKpits & GearPics

rude66 wrote:
alex_d_steak wrote:

@Zthee:

real nice modular over there! any info about the panel markings? how did you do that/

i was wondering the same thing.. looks very nice!

Thanks!

It's a transparent adhesive paper I just attached to the panel. And then sprayed with varnish. I honeslty don't remeber the name of it. Though it was very expencive (like

48 Reply by Dez

  • Dez
  • Le Bon Bot
  • Offline
  • From: The Wick
  • Registered: 2008-07-08
  • Posts: 996

Re: New COCKpits & GearPics

@teknob - how did you mount the 19" rack to the stolman? Nice setup!

@zthee - beautiful modular!...did you design your own panels?

49 Reply by teknob (edited by teknob 2008-07-28 18:41:58)

  • From: Frank fruits
  • Registered: 2008-07-08
  • Posts: 351

Re: New COCKpits & GearPics

Dez wrote:

@teknob - how did you mount the 19" rack to the stolman? Nice setup!

I obtained some telecoms surplus rack rails. Stuff you would make server/router rooms out of. Sort of like this, but not exactly: http://www.middleatlantic.com/rackac/rail/rail.htm

Then I bolted these rails to the stolmen using the standard brackets they sell.

It happens that the standard shorter stolman shelf, at 55cm, is close enough to 19"

Actually, I should buy some more of those rails and take it 19" all the way up the ceiling!

teknob's Website

50 Reply by Dez

  • Dez
  • Le Bon Bot
  • Offline
  • From: The Wick
  • Registered: 2008-07-08
  • Posts: 996

Re: New COCKpits & GearPics

hahah thats awesome...i may have to steal your idea!