You are not logged in. Please login or register.
Robots for Robots → General Hardware / Software Discussion → electribe and mirokorg question
Maybe a stupid question but,I have a track, Electribe is the master and sends tempo information to the microKorg
I guess you mean connecting to the midi interface...
Can you explain your problem more in detail?
Take a pic of the routing on your moble and post! But it sounds like you need to set up a MIDI dasychain..
yes,i want to have that track with the sequence in Logic(all the midi notes of the electribe and micro arpeggio),the problem is that Electribe is the master and sends tempo information so i am using the midi cables and the in and out ports of eletribe and microkorg, so i can
Is something like that
http://es.youtube.com/watch?v=gZza6FWYaLs
yeah, im in underwear.
pd: the connection is easy: electribe midi in to microkorg midi out and electribe midi out to microkorg midi in(two cables)
I'm not sure on your question but I am pretty sure your issue is that the korg does not send arpeggio information. They have a wak way of doing arp's that wont record on your sequencer well anyway not as arp notes. That is one good reason i never bought one.
Why you wanna connect the microK midi out to the elektribe?
Logic midi out to elektribe,thru from there to the microkorg.
The electribe and microK will get the midi clock from logic.
Then you patch both midi outs into your computer and you record all the midi data you want by tweaking the knobs...
Be sure to set all the midi filters in logic to Off or it will ignore some data...
put both from and to the card to the microkorg midithrough from microkorg to the elektribe, or switch korg and tribe around if that also has through.
page 50 of the manual deals with recording arp info.
i just tested it with logic and it works.
Underwear.. Errr? rocking with ya pants out!
ok, but not when being externally triggered. doh!
i guess you just need to record the arps using the micro with global position: PoS and midi local: on
have you tried logics arp?
its pretty good
you could definately get the same sort of panty jam effect your after!
i know this is not going to solve your problem but it is a nice trick:
when recording arps from the MCK you can either record just the notes you hit on the keyboard or all of the arpeggiated notes by changing the POSITION function under global from PRE to POST
oh i take back my comments seems korg now has a way to output arp notes as honey says...very nice. Might think about getting r3 now.
yes, but it only outputs them when being played locally in 'post' position.
Robots for Robots → General Hardware / Software Discussion → electribe and mirokorg question
Powered by PunBB, supported by Informer Technologies, Inc.
Currently used extensions: pun_approval, pun_admin_add_user. Copyright © 2009 PunBB