• Registered: 2009-02-22
  • Posts: 109

Re: New COCKpits & GearPics

What I mean by set it up Proper is alot of the setup is the Actual Mic Channel Strip I have to Patchup: External Preamp, compressor, some EQ. The Clarity improves like that. Also once you tame the vocal dynamics you can control the amount of 'Fuzz' on the Novation. That is what I was daydreaming about  in a Fantasy Korg unit, is for a company to step up and give all those tools in one box. Not just plug in your Mic and put up the gain. I believe that Kurzweil was going to attempt that on there VA synth. The one that got scrapped.

The Nova Vocoder tinkering on the unit itself does not take that Long once i set up the channel strip. Everything becomes clear.

Planet of Cevo
  • From: Dark Side of Uranus
  • Registered: 2008-08-01
  • Posts: 905

Re: New COCKpits & GearPics

Blue Maquina wrote:

What I mean by set it up Proper is alot of the setup is the Actual Mic Channel Strip I have to Patchup: External Preamp, compressor, some EQ. The Clarity improves like that. Also once you tame the vocal dynamics you can control the amount of 'Fuzz' on the Novation. That is what I was daydreaming about  in a Fantasy Korg unit, is for a company to step up and give all those tools in one box. Not just plug in your Mic and put up the gain. I believe that Kurzweil was going to attempt that on there VA synth. The one that got scrapped.

The Nova Vocoder tinkering on the unit itself does not take that Long once i set up the channel strip. Everything becomes clear.

yeah that is always a hassle, the creamware vocodizer needed also a beefy compressor/limiter on the mic to get the good results etc.

Darklord Supreme of the Antigroove stellar systems
http://www.jamendo.com/en/artist/Septic_Underground
http://soundcloud.com/septicstudio

Septicstudio's Website

  • rude66
  • robot des duivels
  • Offline
  • Registered: 2008-07-07
  • Posts: 1,844

Re: New COCKpits & GearPics

the very nature of a vocoder requires that you do this. to get a good sound from one opf the high end vocoders, it needs to be set up properly. same goes for the smaller hardware ones.

its what i love about the micro modular vocoder, the patch has all that shit built in already. literally plug andp lay..

429 Reply by kroko

  • Registered: 2008-08-14
  • Posts: 53

Re: New COCKpits & GearPics

Thanks to Santa my gear was a little bit pimped :-)


Like it was first..


http://i955.photobucket.com/albums/ae33/kroko71/P1000160Custom.jpg




After X-mas :



http://i955.photobucket.com/albums/ae33/kroko71/goodysCustom.jpg



http://i955.photobucket.com/albums/ae33/kroko71/totalCustom.jpg

" only music survives "

kroko's Website

  • rude66
  • robot des duivels
  • Offline
  • Registered: 2008-07-07
  • Posts: 1,844

Re: New COCKpits & GearPics

all you need now for them is a fake tone arm.. big_smile

431 Reply by DamDuram (edited by DamDuram 2010-01-03 04:01:53)

  • DamDuram
  • Guest

Re: New COCKpits & GearPics

@kroko: that looks very nice, this board. why not draw this shadow from the cd-players to the wall?


my mate bought this beauty very quick yesterday. really not bad from my first impressions. has some probs with some knobs, but i think he can fix it.

http://farm5.static.flickr.com/4029/4239348792_f289c08435_o.jpg

432 Reply by Brian Chinetti (edited by Brian Chinetti 2010-01-03 12:51:30)

  • Registered: 2008-07-07
  • Posts: 663

Re: New COCKpits & GearPics

Nice! I was never able to get some split channels, I kinda envy your mate for having those smile

When (if) you start servicing the Dayner's modules, be very careful unhooking the module ribbons (you'll find two strings of ribbons, on top and on the bottom of each module). Both the connectors and ribbons are build quite badly and the ribbons are not modular themselves, which means you can't take the ribbon strings apart*. So if you fuck one up, you fuck 'em all up. It's a big design flaw for a modular desk, it actually makes it semi-modular.
Since this is the 31 channel chassis I'm quite sure you can dismount the bottom plate (I can on mine) and unhook the ribbons from there. On my 42 channel frame the base plate is welded to the frame which makes it much harder to service and easier to fuck those ribbons up.

*I can only be 100% sure about the ribbons on Dayners with the old 'DR' logo (without the '&' imposed on the D and R fonts). Yours has the newer 'D&R' logo, and I once was told D&R changed the ribbon design when they changed the company logo so maybe this is what they changed. But until you're absolutely sure, you'll need to be cautious. I have both sets of modules, thus with the old and new logo, but I don't dare to touch the newer modules until I really need to smile

Brian Chinetti's Website

433 Reply by DamDuram

  • DamDuram
  • Guest

Re: New COCKpits & GearPics

brian, thank you for your input here. that saved us having trouble with this thing. that was close, because i suggested to open it. thanks god, we are sooo lazy.
the board was really covered with dust when he got it, but now, after a while, the crackels vanish, but it needs a service anyway. good to know, we have to be careful. we both thought, it

  • Registered: 2009-05-20
  • Posts: 32

Re: New COCKpits & GearPics

http://le-sous-sol.fr/fourretout/studio012009.jpg

my small stuff, there's also a bit01 expander that we can't see on the photo...

Le Sous-sol

435 Reply by zora (edited by zora 2010-01-05 13:28:59)

  • zora
  • robette f.t. ☆ ☆
  • Offline
  • From: a vanished galaxy
  • Registered: 2008-07-07
  • Posts: 1,453

Re: New COCKpits & GearPics

haha, is that danny on that cup? i want one!

you all got very nice spaces, btw, some a bit messy, but nevertheless.

kroko wrote:

http://i955.photobucket.com/albums/ae33 … ubel-1.jpg

and this is extra nice!

.."this world`s a bubble"..
  • Registered: 2008-07-07
  • Posts: 755

Re: New COCKpits & GearPics

That "CoffeeWelt Mug" is the shizzle

  • From: Britney
  • Registered: 2008-07-09
  • Posts: 547

Re: New COCKpits & GearPics

http://www.fileden.com/files/2007/3/11/873537/ed-10%20vokoder%203.JPG
New mixing surface.. i created a "Sony MXP-58" (MXP-29 x 2) ..
the one on the left from mono-poly , thanks a lot mate!

438 Reply by Brian Chinetti (edited by Brian Chinetti 2010-01-05 14:17:05)

  • Registered: 2008-07-07
  • Posts: 663

Re: New COCKpits & GearPics

MenschMaschine wrote:

That "CoffeeWelt Mug" is the shizzle

Kinda scary, considering there's also a Jesus mug.

Brian Chinetti's Website

439 Reply by MenschMaschine (edited by MenschMaschine 2010-01-05 14:41:23)

  • Registered: 2008-07-07
  • Posts: 755

Re: New COCKpits & GearPics

Well as Jay Overdose said earlier....First comes Jezus  then comes Smackos
It is kinda scary though

  • Registered: 2009-05-20
  • Posts: 32

Re: New COCKpits & GearPics

in fact i first take some coffee with danny then tea with jesus... so first comes smackos then comes jesus...

Le Sous-sol
  • Registered: 2008-07-08
  • Posts: 692

Re: New COCKpits & GearPics

the accesory for the discerning conaisseur.

Carbon Chic - A Broken Man

Marco Tulio Thrash's Website

442 Reply by automatique (edited by automatique 2010-01-06 03:38:49)

  • From: m.s.e.
  • Registered: 2008-07-08
  • Posts: 471

Re: New COCKpits & GearPics

You should read comments on Legowelt (and other pseudonyms) tracks on youtube or posts. Even the advice on the cheap roland soundcanvas rompler is well known in smackos fan circles around the net. Of course is Jesus only second wink

automatique's Website

  • From: near rotterdam
  • Registered: 2008-07-07
  • Posts: 1,656

Re: New COCKpits & GearPics

olivier8 wrote:

http://www.fileden.com/files/2007/3/11/ … er%203.JPG
New mixing surface.. i created a "Sony MXP-58" (MXP-29 x 2) ..
the one on the left from mono-poly , thanks a lot mate!

Looks nice !

i don't need the gear, the gear needs me 
http://www.mono-poly.nl/

mono-poly's Website

  • Registered: 2008-07-10
  • Posts: 104

Re: New COCKpits & GearPics

http://farm3.static.flickr.com/2674/4248973246_7ec96e6f0a.jpg

.. (dont be afraid, there is no CoffeeWelt Mugs sold on the black market, we're just freaks working in a printer shop ...)

U
  • Registered: 2009-05-20
  • Posts: 32

Re: New COCKpits & GearPics

i know there's a third coffeewelt mug somewhere near 2 mkII in ParisXX.
we should sell it on black market...

Le Sous-sol

446 Reply by beem

  • beem
  • The Methuselah
  • Offline
  • From: Erotic City
  • Registered: 2008-07-07
  • Posts: 15,327

Re: New COCKpits & GearPics

So where do you place your weltmug(tm)-order?

CRACKED BY MR. Z...

beem's Website

447 Reply by Dez

  • Dez
  • Le Bon Bot
  • Offline
  • From: The Wick
  • Registered: 2008-07-08
  • Posts: 996

Re: New COCKpits & GearPics

i want that mug...or a commemorative plate

448 Reply by electrictalk (edited by electrictalk 2010-01-08 17:30:49)

  • Registered: 2009-10-21
  • Posts: 32

Re: New COCKpits & GearPics

http://i144.photobucket.com/albums/r162/electrictalk/CIMG1697.jpg

http://soundcloud.com/electrictalk

electrictalk's Website

  • From: where the heart is
  • Registered: 2008-07-08
  • Posts: 578

Re: New COCKpits & GearPics

No fancy gear, just a simple, "work-in-progress" DJ setup in our new crib..

http://members.home.nl/muuske/setup.jpg

Heil CBS
  • From: hackney grid
  • Registered: 2008-07-09
  • Posts: 328

Re: New COCKpits & GearPics

nice!

signalsum

cimabot's Website