1 Topic by Fotoplastikon (edited by Fotoplastikon 2009-03-08 16:24:42)

  • From: Central Poland
  • Registered: 2008-10-17
  • Posts: 86

Topic: Roland MD8 110V -> Roland MD8 220V

I'm curious...
If I replace blue cable from 120V pin to 220V pin it will work?:)
Black and white cables are connected with power cable and 'AC IN' pins on PCB.
Blue cable is connected with 'AC OUT' and that voltage pin.

http://pustostany.pl/fotoplastikon/md8a.jpg

It can't be so easy.

WWW | MySpace | Youtube

Fotoplastikon's Website

  • ronin
  • cervine lugbot
  • Offline
  • From: now
  • Registered: 2008-07-08
  • Posts: 1,266

Re: Roland MD8 110V -> Roland MD8 220V

i believe it is that easy!
but you need to half the fuse tolerance.

but maybe you should get rudes input first smile

  • Registered: 2008-09-29
  • Posts: 129

Re: Roland MD8 110V -> Roland MD8 220V

yes probably. You'll have to change the fuse as said. Why not get a simple transformer? No soldering and fuse changing,easy to come by, the interface stays original and you can use it for other machines too?